was followed by Jim Watson, a research scientist living in Colorado Springs.Watson
presented two working devices similar to John Bedini's. The smaller device was running
during Watson's entire presentation and the audience could verify that the battery was
being recharged constantly. The larger device, which weighed 800 pounds, was demonstrated
only for 10 minutes due to practical reasons. During this time a constant load of 12kw
could be withdrawn from the device. The device itself was powered by two 12v car
batteries. Jim sold us all out, and I have moved on to other things.
SEE: ENERGY MACHINE PICTURES
Imagine having a small D.C. electrical motor
sitting on your laboratory bench powered by a common 12 volt battery. Imagine starting
with a fully charged battery and connecting it to the motor with no other power input.
Obviously, the motor is going to run off the battery, but by conventional thinking it will
stop when the battery runs down.
Impossible, you say. Not at all. That's precisely
what I have done and the motor is running now in my workshop.
It isn't running by the conventional wisdom of
electrical physics. It isn't running by the conventional rules of electric motors and
generators, but it is running.
It isn't something complex. It is pretty simple,
once one gets the hang of the basic idea.
It is running off the principles of
electromagnetics that Nikola Tesla discovered shortly before 1900 in his Colorado Springs
experiments. It is running off the fact that empty vacuum - pure "emptiness", so
to speak - is filled with rivers and oceans of seething energy, just as Nikola Tesla
It is running off the fact that vacuum space-time
itself is nothing but pure massless charge. That is, vcuum has a very high electrostatic
scalar potential - it is greatly stressed. To usefully tap the enormous locked-in energy
of that stress, all one has to do is crack it sharply and tap the vacuum oscillations that
result. The best way to do that is to hit something resonant that is imbedded in the
vacuum, then tap the resonant stress of the ringing of the vacuum itself
In other words, we can ring something at its
resonant frequency and, if that something is imbedded in the vacuum, we can tap off the
resonance in vacuum stress, without tapping energy directly from the embedded system we
rang into oscillation, So what we really need is something that is deeply imbedded in the
vacuum, that is, something that can translate "vacuum" movement to
Well, all charged particles and ions are already
imbedded in the vacuum by their charged fluxes, so stressed oscillations - that is, vacuum
oscillations - can be converted into normal energy of mass movement by charged particles
or ions, if the system of charged particles or ions is made to resonate in phase with our
tapping "potential". For our purpose, let's use a system of ions.
First we will need a big accumulator to hold a lot
of the charged ions in the system that we wish to shock into oscillation. We need
something that has a big capacitance and also contains a lot of ions.
An ordinary battery filled with electrolyte fits
the bill nicely. While it is not commonly known, ordinary lead-acid storage batteries have
a resonant ionic frequency, usually in the range of from 1-6 MHz. All we have to do is
shock-oscillate the ions in the electrolyte at their resonant frequency and time our
"trigger"potential and "siphon" current correctly. Then if we keep
adding potential to trigger the system we can get all that "potential" to
translate into "free electrical energy".
Look at it this way. Conventionally
"electrostatic scalar potential" is composed of work or energy per column of
charged particle mass. So if we add potential alone, without the mass flow, to a system of
oscillating charged particles, we add "physical energy" in the entire charged
particle system. In other words, the "potential" we add is converted directly
into "ordinary energy" by the imbedded ions in the system. If we are clever we
don't have to furnish any pushing energy to move pure potential around. (For proof that
this is possible, see Bearden's "Toward a New Electromagnetics; Part IV; Vectors
and Mechanisms Clarified", Tesla Book Co,, 1983, Slide 19, page 43, and the
accompanying write-up, pages 10,11. Also see Y. Aharonov and V. Bohm, "Significance
of Electromagnetic Potentials in the Quantum Theory", "Physical Review",
Second Series, Vol. 115, No. 3, Aug 1, 1959, pages 485-491. On page 490 you will find that
it's possible to have a field-free region of space, and still have the potential determine
the physical properties of the system.)
Now this "free energy resonant coupling"
can be done in a simple, cheap system. You don't need big cyclotrons and huge laboratories
to do it; you can do it with ordinary D.C. motors, batteries, controllers and trigger
And that's exactly what I have done. It's real. It
works. It is running now on my laboratory bench in prototype form.
But that's not all. I am also a humanitarian. I am
concerned for that little old widow lady at the end of the lane, stretching her meager
Social Security check as far as she can, shivering in the cold winter and not daring to
turn up her furnace because she can't afford the frightful utility bills.
That's simply got to change and I may well be the
fellow who changes it. By openly releasing my work in this paper, I am providing enough
information for all the tinkerers and independent inventors around the world to have at
it. If I can get a thousand of them to duplicate my device, it simply can't be suppressed
as so many others have been.
So here it is. I have deliberately written my paper
for the tinkerer and experimenter, not for the scientist. You must be careful, for the
device is a little tricky to adjust in and synchronize all the resonances. You'll have to
fiddle with it, but it will work. Keep at it.
Also, we warn you not to play with this unless you
know what you are doing. The resonating battery electrolyte produces hydrogen, and if you
hit it too hard with a "voltage spike" you can get an electrical spark inside
the battery. If that happens, the battery will explode, so don't mess with it unless you
are qualified and use the utmost caution.
But it does work. So all you experimenters and
pioneers, now's your chance. Have at it. Build it. Tinker with it. Fiddle it into resonant
operation. Then let's build this thing in quantity, sell it widely, and get those home
utilities down to where we can all afford them - including the shivering little old lady
at the end of the lane.
And when we do, let's give men like me the credit
and appreciation they so richly deserve.
The Institute Of Electrical And Electronics Engineers, Inc
John C Bedini has constructed a laboratory model of a machine in which output energy exceeds input. It consists of a lead-acid battery which powers a small DC motor, which turns a magneto-like dynamo, which provides output energy to an electronics package, which in turn feeds timed (scalar?) pulses back to the battery terminals for recharging. As a demonstration, Bedini then removes the good battery and sequentially inserts fully discharged, dead batteries. Each of the dead batteries eventually receives a full charge. Stated differently, He starts with one good battery and four discharged batteries. At the end of the demonstration all five batteries are fully charged. This author has personally visited Bedini's lab many times , in company with technicians and professors of Physics and Electrical Engineering. None of us has been able to fault Bedini's findings. Each of my professorial friends, however, has requested that their names not be used for attribution, the inference being that their respective universities would not be understanding of heretical concepts.
Copyright © 1996